Home
Line-of-sight distance between antennas.
Carrier frequency of the signal.
Distance:
Frequency:

FSPL Reference Table (dB)

Free-space path loss in dB for common frequency bands and distances. These values are theoretical (free space, 100% efficiency). Real-world links see additional loss from atmosphere, obstacles, and antenna misalignment.

Frequency

What Is Free Space Path Loss?

Free space path loss (FSPL) is the attenuation of a radio signal as it travels through free space — no obstacles, no atmosphere, no reflections. It is the theoretical minimum loss any wireless link will experience, caused purely by the geometric spreading of the wavefront as it propagates outward from the transmitting antenna.

FSPL increases with both distance and frequency. Doubling the distance adds about 6 dB of loss; doubling the frequency also adds about 6 dB. This is why high-frequency links (5G mmWave, satellite Ku/Ka band) require much higher gain antennas or much shorter distances than low-frequency links (FM radio, 900 MHz ISM).

The FSPL Formula

The fundamental Friis transmission equation gives path loss as:

FSPL (dB) = 20·log₁₀(d) + 20·log₁₀(f) − 147.55
  where d is in meters and f is in Hz

Equivalent forms using common units:

FSPL (dB) = 32.45 + 20·log₁₀(d_km) + 20·log₁₀(f_MHz)
FSPL (dB) = 32.45 + 20·log₁₀(d_m) + 20·log₁₀(f_GHz)
FSPL (dB) = 92.45 + 20·log₁₀(d_km) + 20·log₁₀(f_GHz)

Quick rule of thumb: every doubling of distance adds ~6 dB; every doubling of frequency adds ~6 dB; every 10× increase in distance or frequency adds ~20 dB.

The Three Calculator Modes

  • Path Loss (FSPL) — given distance and frequency, compute the path loss in dB.
  • Maximum Distance — given a target path loss and frequency, compute the maximum free-space range.
  • Frequency — given path loss and distance, compute the corresponding frequency.

How FSPL Fits Into a Link Budget

A complete wireless link budget looks like this:

Received Power (dBm) = Transmit Power (dBm)
  + Transmit Antenna Gain (dBi)
  − FSPL (dB)
  + Receive Antenna Gain (dBi)
  − Additional Losses (cable, rain, obstacles, etc.)

For the link to work, received power must exceed the receiver's sensitivity (the minimum signal it can decode). FSPL is usually the largest single term in this equation — which is why antenna gain and distance dominate wireless design.

FSPL vs Real-World Path Loss

FSPL is the best case. Real environments add extra loss:

  • Atmospheric absorption — significant above ~10 GHz, especially at 22 GHz (water vapor) and 60 GHz (oxygen).
  • Rain and fog attenuation — meaningful above ~10 GHz, severe above 30 GHz.
  • Obstacles — walls, buildings, terrain, foliage. Each obstruction can add 10–30 dB.
  • Multipath fading — reflections cause constructive and destructive interference.
  • Antenna misalignment — even a few degrees off-axis can lose several dB on narrow-beam antennas.
  • Polarization mismatch — can add 3 dB or more.

Engineers typically apply an additional link margin of 10–30 dB on top of FSPL to account for these effects. The FSPL figure is the theoretical floor, not the expected real-world loss.

Common Frequency Bands

  • 100 MHz — FM broadcast, some aviation
  • 433 MHz — ISM band (Europe), remote controls, LoRa
  • 900 MHz — ISM band (Americas), LoRa, legacy cordless phones
  • 1.8–2.1 GHz — cellular (2G/3G/4G)
  • 2.4 GHz — Wi-Fi (802.11b/g/n), Bluetooth, Zigbee, microwave ovens
  • 5 GHz — Wi-Fi (802.11a/n/ac/ax), some cordless phones
  • 6 GHz — Wi-Fi 6E, some 5G
  • 24–40 GHz — 5G mmWave, satellite Ka-band
  • 60 GHz — WiGig, high-rate short-range links (heavy oxygen absorption)

Why Use This FSPL Calculator?

  • Three modes: Solve for path loss, distance, or frequency.
  • All common units: m / km / mi / nmi / ft and Hz / kHz / MHz / GHz.
  • Formatted results: Distance shown in m, km, mi and nmi; frequency in Hz, kHz, MHz and GHz.
  • Wavelength display: See the operating wavelength at a glance.
  • Reference table: Common bands × distances pre-computed.
  • Free & private: Runs entirely in your browser — no data is sent to a server.

❓ Free Space Path Loss FAQ

What is free space path loss?

Free space path loss (FSPL) is the reduction in signal power density as a radio wave spreads outward from an isotropic antenna through empty space. It is the theoretical minimum path loss a wireless link can experience and is a function of only distance and frequency.

What is the FSPL formula?

FSPL (dB) = 20·log₁₀(d) + 20·log₁₀(f) − 147.55 where d is in meters and f is in Hz. Using km and MHz: FSPL = 32.45 + 20·log₁₀(d_km) + 20·log₁₀(f_MHz). Using km and GHz: FSPL = 92.45 + 20·log₁₀(d_km) + 20·log₁₀(f_GHz).

Why does higher frequency mean more path loss?

At a fixed distance, the receiving antenna captures a smaller fraction of the wave's energy at higher frequencies because the effective aperture of the antenna shrinks as wavelength decreases. Equivalently, a smaller wavelength means more wavelengths fit across the same distance, so the wavefront spreads out more in "wavelengths." Either way: doubling frequency adds ~6 dB of loss.

What is a typical FSPL value?

For Wi-Fi (2.4 GHz) at 100 m, FSPL is about 80 dB. For Wi-Fi at 1 km, it's about 100 dB. For a satellite link at 36,000 km and 12 GHz, FSPL is about 205 dB. For 5G mmWave (28 GHz) at 100 m, FSPL is about 101 dB.

Does FSPL include antenna gain?

No. FSPL is the loss between two isotropic (0 dBi) antennas. Real antennas add gain on top — a 20 dBi dish reduces effective path loss by 20 dB. In a link budget, antenna gains are added separately from FSPL.

What's the difference between FSPL and total path loss?

FSPL is the free-space component only. Total path loss = FSPL + additional losses (atmospheric absorption, rain, obstacles, multipath fading, antenna misalignment, polarization mismatch). Real-world systems typically have 10–30 dB more loss than FSPL alone, which is why link margins exist.

At what distance does FSPL exceed a given value?

Use the Maximum Distance tab: enter your target FSPL and frequency. For example, 100 dB FSPL at 2.4 GHz corresponds to roughly 1 km in free space. At 5 GHz, the same 100 dB budget gives about 490 m. At 28 GHz, about 88 m.

Is FSPL the same as free space path loss exponent 2?

Yes. FSPL assumes a path loss exponent of n = 2, meaning power falls off as 1/d² (20 dB per decade of distance). Real environments have higher exponents: ~2.7–3.5 in urban areas, ~3–4 indoors, and even higher through walls. The "log-distance path loss model" generalizes FSPL to real environments.

Why is FSPL sometimes negative?

At extremely small distances (less than about a wavelength) and at very low frequencies, the FSPL formula can produce a negative number. This is a mathematical artifact of the idealized point-source model — FSPL assumes the antennas are in each other's far field. In practice, FSPL is only meaningful when the distance is much larger than the wavelength.

Is this FSPL calculator free?

Yes. This tool is completely free, requires no registration, and runs entirely in your browser. Your inputs are never sent to a server.