RF Link Budget Calculator
Calculate the received signal power, EIRP, fade margin, and maximum range for any wireless link. Enter transmitter and receiver parameters, path distance, and frequency to see if your link closes with sufficient margin.
Typical Receiver Sensitivity & Fade Margin Reference
Typical receiver sensitivity values for common wireless technologies and recommended fade margins for different availability targets. Actual values depend on data rate, modulation, and implementation.
| Technology | Typical Sensitivity | Typical Frequency | Recommended Fade Margin |
|---|---|---|---|
| Wi-Fi (802.11b/g) | −85 to −90 dBm | 2.4 GHz | 10–20 dB |
| Wi-Fi (802.11ac) | −70 to −80 dBm | 5 GHz | 15–25 dB |
| Bluetooth LE | −90 to −95 dBm | 2.4 GHz | 10–15 dB |
| LoRa (SF7) | −123 dBm | 868/915 MHz | 10–20 dB |
| LTE (Cat-4) | −100 to −110 dBm | 700–2600 MHz | 10–15 dB |
| 5G mmWave | −80 to −90 dBm | 28 GHz | 20–30 dB |
| Point-to-point microwave | −70 to −80 dBm | 6–42 GHz | 20–30 dB |
| Satellite (Ku-band) | −70 to −80 dBm | 12–18 GHz | 3–6 dB (with rain margin) |
What Is a Link Budget?
A link budget is an accounting of all the gains and losses a radio signal experiences from the transmitter, through the propagation medium, to the receiver. It predicts the received signal power and determines whether a communication link is feasible. The fundamental equation is:
− Lpath (dB) + GRX (dBi) − LRX (dB)
Where PTX is the transmit power, LTX and LRX are cable and connector losses at the transmitter and receiver, GTX and GRX are antenna gains, and Lpath is the path loss (typically free-space path loss, optionally plus additional losses).
EIRP (Equivalent Isotropically Radiated Power)
EIRP is the total power that would be radiated by an isotropic antenna to produce the same signal strength in the direction of maximum radiation. It is calculated as:
EIRP is a key regulatory and design parameter. Many jurisdictions limit the maximum EIRP for specific frequency bands.
Fade Margin
The fade margin is the difference between the received signal power and the receiver sensitivity:
A positive fade margin indicates the link is viable. A larger margin provides greater reliability against fading, interference, and other impairments. Typical designs target a margin of 10–30 dB, depending on the required availability.
Path Loss
The path loss term Lpath is usually dominated by the free-space path loss (FSPL), which depends on distance and frequency:
where d is in meters and f is in Hz.
Additional losses (rain, atmospheric absorption, obstacles, etc.) can be added using the "Additional Losses" field.
The Three Calculator Modes
- Link Budget — given all parameters, compute received power and fade margin.
- Maximum Range — given a target fade margin, compute the maximum free-space distance.
- Required TX Power — given a desired fade margin and distance, compute the minimum transmit power needed.
Why Use This Link Budget Calculator?
- All-in-one: Handles EIRP, path loss, received power, and fade margin in one place.
- Three solve modes: Budget analysis, range estimation, and power sizing.
- Unit flexibility: Supports m, km, mi, nmi, ft and Hz, kHz, MHz, GHz.
- Additional losses: Add rain, atmospheric, or obstacle losses for realistic results.
- Reference table: Typical sensitivity and margin values for common technologies.
- Free & private: Runs entirely in your browser — no data is sent to a server.
❓ RF Link Budget FAQ
What is a link budget?
A link budget is a systematic accounting of all gains and losses in a wireless communication link, from the transmitter output to the receiver input. It determines whether the received signal is strong enough to be decoded reliably.
What is EIRP?
EIRP (Equivalent Isotropically Radiated Power) is the total power radiated by an antenna in its direction of maximum gain, expressed in dBm or dBW. It equals TX power minus cable loss plus antenna gain. Many regulators limit maximum EIRP.
What is a good fade margin?
Typical targets are 10–20 dB for indoor or short-range links, and 20–30 dB for outdoor point-to-point or high-availability links. Satellite links may use lower margins because rain fade is modeled separately.
How do I calculate maximum range?
Use the Maximum Range tab. Enter your system parameters and a desired fade margin. The calculator inverts the link budget equation to solve for distance, assuming free-space path loss.
Why is received power negative in dBm?
dBm is a logarithmic unit relative to 1 milliwatt. Negative values simply indicate power levels below 1 mW. For example, −90 dBm is 1 picowatt, a typical receiver sensitivity.
Does this calculator include rain fade?
Not automatically. You can add rain or atmospheric attenuation using the Additional Losses field. For precise rain fade modeling, use ITU-R P.838 recommendations.
Is this calculator free?
Yes. This tool is completely free, requires no registration, and runs entirely in your browser. Your inputs are never sent to a server.