Home
Pick a shape to reveal its dimension fields.
Results are in the corresponding unit⁴.
Examples:

Mass Moment of Inertia of Common Bodies

For dynamics problems the moment of inertia depends on the mass distribution. These are the standard formulas for common rigid bodies.

Body Axis Mass Moment of Inertia
Thin rod (length L)Through centre, perpendicular to rodm L² / 12
Thin rod (length L)Through one end, perpendicular to rodm L² / 3
Solid cylinder (radius r)Longitudinal axism r² / 2
Solid cylinder (r, length L)Transverse axis through centrem (3r² + L²) / 12
Hollow cylinder (R, r)Longitudinal axism (R² + r²) / 2
Solid sphere (radius r)Diameter2 m r² / 5
Spherical shell (R, r)Diameter2 m (R⁵ − r⁵) / (5 (R³ − r³))
Rectangular plate (a × b)Through centre, perpendicular to platem (a² + b²) / 12

What Is Moment of Inertia?

Moment of inertia measures how a body resists changes to its rotation (mass moment) or how a cross-section resists bending (area moment). The two are related but distinct:

  • Area moment of inertia (second moment of area, I) is a purely geometric property of a shape. It is used in beam deflection and bending stress calculations. Units are length⁴ (mm⁴, in⁴).
  • Mass moment of inertia (rotational inertia, I) depends on the mass distribution of a three-dimensional body. It is used in dynamics and rotational kinetic energy. Units are mass·length² (kg·m², slug·ft²).

Area Moment of Inertia: The Core Formula

For a cross-section, the area moment of inertia about an axis is:

I = ∫ y² dA

where y is the perpendicular distance from the axis to the differential area element dA. Because the distance is squared, material far from the neutral axis contributes much more to I than material near it. This is why I-beams are shaped with flanges far from the centre — they achieve a high I with relatively little material.

Section Modulus and Radius of Gyration

Two derived properties are commonly reported alongside I:

Section modulus S = I / c
Radius of gyration r = √(I / A)

Section modulus is used to compute bending stress: σ = M / S, where M is the bending moment and c is the distance from the neutral axis to the extreme fibre. Radius of gyration is used in column buckling analysis (Euler buckling load is proportional to r²).

The Parallel Axis Theorem

If you know the moment of inertia about the centroidal axis (Icm), the moment of inertia about any parallel axis at distance d is:

I = Icm + A d² (area moment)
I = Icm + m d² (mass moment)

The parallel axis theorem is the workhorse of composite-section analysis. Split an I-beam into rectangular flanges and web, compute each part's I about its own centroid, shift each to the global centroid with A d², and sum.

Key insight: the centroidal axis always gives the minimum moment of inertia. Any parallel axis further from the centroid has a larger I.

Why Use This Moment of Inertia Calculator?

  • Eight cross-section shapes: solid and hollow rectangle, solid and hollow circle, triangle (centroid and base), I-beam, T-beam.
  • Complete output: Ixx, Iyy, polar J, section modulus, radius of gyration and area — all in one go.
  • Parallel axis tool: instant shift from centroidal to any offset axis.
  • Formula reference: all area and mass moment formulas in one place.
  • Practice quiz: randomised questions with instant explanations.
  • Free & private: runs entirely in your browser — no dimensions are sent to a server.

❓ Moment of Inertia FAQ

What is the difference between area moment and mass moment of inertia?

Area moment of inertia (I) is a geometric property of a 2D cross-section, used in beam bending (units: length⁴). Mass moment of inertia is a dynamic property of a 3D body, used in rotation (units: mass·length²). They share the same name and the same parallel-axis theorem structure, but they are not interchangeable.

Why does a hollow tube have a higher I than a solid rod of the same weight?

Because I = ∫ y² dA, material far from the neutral axis contributes much more than material near it. A hollow tube puts most of its material at the outer radius, where the y² factor is large, while a solid rod wastes material near the centre where y is small.

What is the polar moment of inertia J?

The polar moment of inertia is the moment of inertia about an axis perpendicular to the cross-section (the z-axis). For a planar shape, the perpendicular-axis theorem gives Jc = Ixx + Iyy. It is used in torsion calculations: τ = T r / J.

How do I calculate I for an I-beam?

Treat the I-beam as three rectangles (top flange, web, bottom flange). Compute each rectangle's I about its own centroid (b h³ / 12), then use the parallel axis theorem to shift each to the global centroid, and sum. This calculator does that automatically from the flange and web dimensions.

What is the radius of gyration used for?

Radius of gyration r = √(I/A) is used in column buckling. The Euler buckling load is Pcr = π² E I / (K L)² = π² E A / (K L / r)². A larger r means a stockier, more buckling-resistant column.

Can I use this calculator for composite sections?

Yes, indirectly. Compute each component's I about its own centroid with the Shape Calculator, then use the Parallel Axis Theorem tab to shift each component to the global centroid and sum the results. The I-beam and T-beam options already implement this composite logic.

Which axis is the "strong axis"?

The strong axis is the one with the larger moment of inertia — typically the x-x axis for an I-beam oriented with the web vertical. Bending about the strong axis produces lower stress and deflection for the same moment. The weak axis (usually y-y) has a smaller I.

Is this calculator free and private?

Yes. It is completely free, requires no registration, and every calculation — including the parallel axis tool and the quiz — runs locally in your browser. No dimensions are ever transmitted to a server.